top of page

PS5 Overheating or Loud? Cleaning & Liquid Metal Replacement

6 days ago
3 min read

Is your PS5 sounding like a jet engine, shutting down in the middle of a game or showing an overheating warning? It's usually dust build-up or a cooling problem. Here's what to check at home, and how our PS5 cleaning service and liquid metal replacement fix it in Auckland and Hamilton.

Signs Your PS5 Is Overheating

  • The fan is loud all the time, even on menus

  • The console turns itself off during games

  • An overheating warning appears on screen

  • Games stutter, freeze or crash

  • The console feels very hot, or dust is visible in the vents

What Causes a PS5 to Overheat?

  • Dust and pet hair clogging the fan, heatsink and vents. This is the most common cause.

  • Poor placement, such as an enclosed cabinet, right against a wall, or on carpet.

  • Fan problems, such as a worn or rattling fan.

  • Cooling contact problems. The PS5 uses liquid metal between the processor and heatsink. If it has moved or dried out, often after the console has been opened before, temperatures climb.

What You Can Do at Home

  • Give the console plenty of space on all sides and keep it out of closed cabinets

  • Keep it off carpet and away from where pet hair collects

  • Remove the side covers and vacuum out the two dust catcher holes

  • Keep the system software up to date

The dust catchers help, but they don't stop all dust reaching the fan and heatsink. If it's still loud or hot, it needs a proper internal clean.

Our PS5 Cleaning Service

We fully open the console and clean the fan, heatsink fins, vents and power supply airflow, which a vacuum can't reach. We check the fan for wear, then test the console under load to make sure temperatures and fan noise are back to normal.

Technician cleaning dust from a PS5 cooling fan and heatsink during a PS5 cleaning service

PS5 Liquid Metal Replacement

Instead of normal thermal paste, the PS5 uses liquid metal between the main processor and the heatsink. It moves heat away very well, but it's also electrically conductive, so it's held in place by a foam barrier around the chip.

Liquid metal doesn't need routine replacing like thermal paste. It needs attention when overheating continues after a clean, when the console has been opened or the heatsink removed before, or after a board repair.

Why not do it yourself? If liquid metal touches the board, it can short out components. It has to be removed and reapplied carefully, with the nearby parts protected.

Liquid metal being reapplied to a PS5 processor inside its protective foam barrier

How we replace PS5 liquid metal

  1. Remove the heatsink and fully clean the old liquid metal off the chip and heatsink

  2. Protect the surrounding components

  3. Apply new liquid metal in the right amount, and replace the foam barrier if needed

  4. Clean the console, reassemble it and test temperatures under load

PS5 Overheating FAQs

How often should a PS5 be cleaned?

Most consoles benefit from a professional clean every year or two, and sooner if you have pets or a dusty room. If it's getting loud, it's time.

Is it safe to stand my PS5 upright?

Yes. There were early worries about liquid metal moving when the console stands vertically, but these were largely debunked.

How long does a PS5 cleaning take?

Same-day options are available for common jobs like cleaning. We'll confirm the timeframe when you book.

Will opening my PS5 affect the warranty?

Opening the console can affect the manufacturer's warranty. If your PS5 is new and still under warranty, check with Sony first.

Do you clean Xbox and PS4 consoles too?

Yes. We clean Xbox Series X/S, Xbox One, PS4 and PS4 Pro consoles as well.

Book a PS5 Clean or Cooling Repair

Bring your console to Tech4You in Newmarket, Ellerslie or Hamilton for a free inspection and quote, or see all our gaming console repairs.

 
 
bottom of page