PS5 HDMI Port Replacement: No Signal? Here's the Fix
Your PS5 turns on but the TV says No signal? The picture flickers or cuts out when you touch the cable? A damaged HDMI port is one of the most common console repairs we see. Here's how to tell if it's the port, what to check first, and how Tech4You does PS5 HDMI port replacement in Auckland and Hamilton.
Signs Your PS5 HDMI Port Is Damaged
PS5 powers on, but the TV shows no signal
The picture flickers or drops out when the cable moves
You get sound but no picture
The HDMI cable feels loose, or won't go in properly
Pins inside the port look bent, broken or pushed in
The port looks tilted or lifted from the console

Check These First (It Might Not Be the Port)
Try another HDMI cable, ideally the one that came with your PS5.
Try another HDMI input or TV, and make sure the TV is set to the right input.
Reset the video output in Safe Mode. Turn the PS5 off, then press and hold the power button until you hear the second beep. Connect your controller with a USB cable, press the PS button and choose Change Video Output.
If there's still no picture on any TV with any cable, the fault is almost certainly hardware: either the HDMI port or the HDMI chip on the motherboard.
What Damages PS5 HDMI Ports?
Tripping over the cable or pulling it while it's plugged in
Moving the console with the cable still attached
The console falling off a shelf or stand
Forcing the plug in at an angle
Heavy cables or adapters putting strain on the port
Stop using it once the port is damaged. Bent pins can short against each other and damage the HDMI chip on the motherboard, which turns a port replacement into a bigger board repair. Don't force the cable or try adapters.
How We Replace a PS5 HDMI Port
The HDMI port on a PS5 is soldered directly onto the motherboard, so it can't just be unplugged and swapped. It's a board-level micro-soldering job:
Diagnosis. We check whether the fault is the port itself or the HDMI chip behind it.
Strip down. We fully disassemble the console and remove the motherboard.
Remove the old port. The damaged port is desoldered and the pads are cleaned.
Fit the new port. A new HDMI port is micro-soldered on, and every joint is checked under the microscope.
Clean and test. While it's open we clean out the dust, then test picture and sound on a TV before you pick it up.
If the HDMI chip has also been damaged, we'll explain what's needed and give you a quote before going ahead.
Xbox Series X/S and PS4 HDMI Ports Too
We also replace HDMI ports on Xbox Series X, Xbox Series S, Xbox One, PS4 and PS4 Pro consoles, using the same board-level process.
PS5 HDMI Port FAQs
How long does a PS5 HDMI port replacement take?
Common repairs like HDMI ports can often be done same day when the part is in stock. We'll confirm the timeframe with your quote.
How much does it cost?
It depends on whether only the port is damaged or the HDMI chip too. We inspect it and give you a free quote first.
Will I lose my games or saves?
No. Replacing the HDMI port doesn't touch the console's storage. If you have PlayStation Plus, it's still worth making sure your saves are backed up to the cloud.
Is it covered by Sony's warranty?
Physical damage like a broken HDMI port usually isn't covered by the manufacturer's warranty. If your console is still under warranty and the fault isn't accidental, check with Sony first.
Get Your PS5 Picture Back
Bring your console to Tech4You in Newmarket, Ellerslie or Hamilton for a free inspection and quote, or see all our gaming console repairs.

